Final artifacts (poster (yellow), bus stop/placard (purple), motion piece(green)):
Keynote presentation
This project has been challenging yet fun at the same time. At the beginning, we circled around ideas a lot and it took a long time to just even nail one down. Once we decided to go with the avoid idea, it was more formally challenging. We knew we wanted the split already but wasn't sure how to go about it. Then we added images and colors and different phrases. In the end, I'm satisfied with what we created. Making the presentation was a challenge of itself. It was challenging to know what to say on top of what to show at the same time. Overall, I learned so much from this project, especially how to work with a partner. I think my concept ideas are more strong now as well as formal executions. A lot of it was influenced by the partnership but it has also taught me a lot about how I think and work.
Showing posts with label Visual Language. Show all posts
Showing posts with label Visual Language. Show all posts
12.03.2010
12.02.2010
Presentation Readings
I do declare:
This was a good article to read. It listed bullet points and elaborated on them. Overall, presentation is all about confidence and keeping the audience engaged. The writer talks about how to do those things and how important it is that the audience keeps their interest. The person presenting should also know a few things like how to talk and what to present. What they say doesn't always have to be on screen and what they show doesn't always have to be said, but you also don't want to overlap people's voices in their head. Not quite the best advice out of the whole article, but I like how the writer told the presenter that they should "levitate".
Be Selfish:
This article supports the previous article a lot. In this one, it talks about knowing the audience. Our presentation should revolve around the audience and don't always assume they know what we know as designers. Hierarchy in what we show and what we say is also important. We also want to keep things simple in terms of the design of the presentation.
This was a good article to read. It listed bullet points and elaborated on them. Overall, presentation is all about confidence and keeping the audience engaged. The writer talks about how to do those things and how important it is that the audience keeps their interest. The person presenting should also know a few things like how to talk and what to present. What they say doesn't always have to be on screen and what they show doesn't always have to be said, but you also don't want to overlap people's voices in their head. Not quite the best advice out of the whole article, but I like how the writer told the presenter that they should "levitate".
Be Selfish:
This article supports the previous article a lot. In this one, it talks about knowing the audience. Our presentation should revolve around the audience and don't always assume they know what we know as designers. Hierarchy in what we show and what we say is also important. We also want to keep things simple in terms of the design of the presentation.
Communication Model
First round with analog and digital models:
"Final" digital scheme:
The idea is there, formally it's not though and that's what I needed to improve. So I redid it and now it is this:
"Final" digital scheme:
The idea is there, formally it's not though and that's what I needed to improve. So I redid it and now it is this:
Avoid Iterations
Since we decided what problem we were going to pursue, we came up with various tag lines and subtext. The top ideas were remember, avoid, think about it, and keep track. We showed all of these for crit along with some artifacts based on our channels.
The first one is a postcard and the second one is a storyboard for a motion piece. Joseph did a several versions of a poster for our other 2 ideas. We ended up going with the "avoid" idea because it could be read as "a void" or "avoid" and I like that play on words. So from there we just made a ton of iterations on how this could work on a poster first since if we figured that out, it could be applied to all the other channels. Our final channels are bus stop/placard inside the bus, a poster, and a motion piece. We also have 3 messages so each one is applied to each channel. For the message, we stated a fact and then provided a solution. We also made a number/website for people to contact if they wanted more information that isn't real. Joseph has a ton of iterations on his computer and maybe he'll upload those.
We ended up basing everything on the yellow and black versions (the bottom ones) and made the bus and the motion piece. We also changed the color and image based on the message. There was a lot more writing down on paper and ideas swirling in our head than there is physical artifacts so I didn't post them but instead did a lot of paraphrasing.
Poverty Intervention
This project stemmed from a simulation that our class was involved in that made us experience the life of an impoverished person. We were assigned to create a design intervention to solve problems that we saw at the simulation with a partner and mine was Joseph. The first 3 we came up was presented in a Keynote presentation. We wanted to address the upper class and make them aware. Our base schematic for this:
Those ideas didn't go over so well so we started from scratch again. This time, we made our audience the impoverished people and came up with many more ideas. One was to create something that people can carry around that would list all the places and the services they provided. That idea was already taken by another group so we didn't pursue it. Another idea was to create a community garden and a system that let the people interact with one another. They would plant whatever they want and take whatever they want. That turned out too be too complexed to do in several weeks so we dropped that idea. Another one we had was to create a system that allowed people to be part of this community that opened up their houses at night for people who got kicked out that night and it was too late to go to the homeless shelter. There is something like that already so we dropped that one. After all of these ideas, we finally landed on making an awareness campaign that reminded people to not get ripped off. I like that we kind of went full circle since we started with awareness and ended with awareness, just this time its another audience with another message.
10.31.2010
Communication Models
In all the assigned readings and video, the message is pretty much the same. There are multiple communication models that includes the source, message, channel, and receiver. In all three, they talk about the importance of each one. The source is where the message is coming from. It is the place that decides what information is going where. Then there is the message which is the message itself, the information that needs to be passed on. The channel is what the message travels through and in this channel, there might be noise that distorts the information. The receiver is the destination of the message. It is where the message is meant to reach. Through the whole process, information could be left out or new information could get included. In Berlo's model, he lists elements that will affect the course of the information like attitude, knowledge, and the channel the information is conveyed through. The thing that wasn't mentioned in all three was feedback from the receiver. The only reading that mentioned it was from the book where they talked about it in respect to the designer's world rather than everyday use of the model. Feedback is extremely important to know if the message you are conveying is clear or not. Another thing that is important when making a communication model is noise and how it affects the message. Noise can range from anything that affects the message's clarity. The best way to lower the noise is through redundancy, which is to show the message, or repeat it, multiple times to make sure the receiver understands it. In general, you want your message to be conveyed thoroughly so that everyone would be able to understand it as well as get feedback on it so that you can improve the parts that is weak in conveying the information.
10.28.2010
Tropicana Redesign
The first sentences or so made me smile because it reminds me of what happened when the Gap changed their logo several weeks ago and it got negative comments. The packaging design business is really reliant on the consumers and people don't like change. Since Tropicana had such a strong and memorable design, when it changed into something that wasn't as clever and looked plain, people wanted the old design back. I feel that is the same with the Gap because the original logo was a lot better than the one they put out weeks ago. It is also interesting how much input from the consumers is considered and how they are voicing their opinions. With technology these days, it's quick to get a response to your design and gather other ideas. Packaging design relies heavily on the people that buys it and if it doesn't appeal to the masses, it's not working.
Test
I'm going to use my sketches for these explanations.
Logos is using facts to appeal to the mass. My Dove chocolate sketches use several facts of chocolate itself and how helpful it is to the brain and so forth. I also listed nutrition facts and making it all about the facts and different ways to present it.
Pathos is appeal to people's emotions and experiences so it differs for every viewer. With Cheerios, I went into the happy and joyful route with the idea that it makes people happy. It also seems like its geared towards kids more than it would to adults just because the nature of cereal and its association with kids.
Final Packaging
Before my final piece, I tried different coloring to the molecules and I used another color that wasn't very "honeycomb" like and I didn't feel like it worked as well so I kept with just oranges and yellows.
I feel like both of my packages have certain audiences. Like logos is directed towards adult more than it is directed towards kids and pathos is more for kids than adults. I find that interesting that it just kind of happened and it makes me wonder if I could have done logos and still appeal to children. I probably could by just the way it is executed. In the end, I'm happy with what I did. I think some parts could be more interesting but once I put it in a context shot, I really like them.
So here are the final designs:
And then the stuff for the presentation critique.
The original package for Cheerios was ethos because of the big white check mark saying that it is whole grain guaranteed along with General Mills logo. So my modes are logos and pathos. For logos, I went with the "help lower your cholesterol" idea and using the molecule as a representation of that. It also has the honeycomb shape, which reiterates that it's Honey Nut Cheerios. I kept with a structured layout and centered my type to make it have more authority and look like it knows what it is talking about. For pathos, I went with a happy theme and the idea that Cheerios is like the sun. You should wake up with the sun and be happy. I drew out all the elements to replicate a child's drawing and therefore hopefully attract kids. I also used a photo of the Cheerios instead of drawing it so that people could recognize that it was a Cheerio and not a drawing of a circle. I tried to keep it fun and light and happy.I feel like both of my packages have certain audiences. Like logos is directed towards adult more than it is directed towards kids and pathos is more for kids than adults. I find that interesting that it just kind of happened and it makes me wonder if I could have done logos and still appeal to children. I probably could by just the way it is executed. In the end, I'm happy with what I did. I think some parts could be more interesting but once I put it in a context shot, I really like them.
Repackaging Rounds
More iterations of the two concepts I continued on with. First, will be my logos. So here are round 1 iterations:
From this round, the middle bottom works the best because of the transparency and the image as background. I kept with that one and continued on with another round. This time, I focused on making the molecule less scientific and more artistic since I had the structure down already.
These are more subtle changes but there are bits and pieces that I pulled from each for the final. The weight change in the molecule looked a lot better than when it was one weight or when it was bubble looking. The details in the molecule looked best with the circles so I took that and applied it to all the detail lines. The font for the numbers weren't working yet so I changed it for the final. Next are my pathos with the swinging girl. While I was working on that, I wasn't really loving it so I reverted back to the Cheerio as the sun since people were talking about it in class so I thought I could at least try it.
I tried the drawing techniques with multiple drawing tools and mixing them here and there. It was decided that I went with the sun concept and honestly, I like it a lot better than the swing. There wasn't much to change in terms of elements, it was just rearranging them here and there. So that's mainly what I did in the last round.
The very last one has a very light blue tint to it but it looked better in just white. So that's that.
Subscribe to:
Posts (Atom)























































